A tree skirt complements the finishing touch to your decorations. The tree skirt is an easy project that doesn’t require any sewing. The ruffled burlap is prodigious for a rustic yet sophisticated look. But if burlap is not your thing, you can also use any other supplies.

You can use décor fabric, cotton prints, or canvas for creating a look that will praise your other holiday decorations. It is ideal to find one of the best wedding and craft product suppliers for purchasing organza fabric, burlap ribbon, tulle, deco mesh, table runner, chair cover, and many others. Below, I’m going to share a step-by-step guide to make a no-sew burlap tree skirt.

Materials That You Will Need:

  • Burlap
  • Felt
  • Ribbon
  • Fabric marker
  • Scissors
  • Hot glue gun

Instructions:

Step 1: Cut the Basic Fabric

Start by making a mark in the middle of the felt. You can use a string, a marker, and a pin for drawing circles. The tree skirt will be 3 feet wide, so you can try the marker 1 1/2 feet from the center. With the help of a pin or something with a point, hold the string on the center mark. After that, draw a circle all the way around. You are able to make your tree skirt any size you want.

Then retie the sign so it’s 3-inches from the middle to make a 6-inch circle. Also, draw a line from the external circle to the innermost circle. Cut out the big circle, down the line, and from place to place the small circle.

Step 2: Glue the Burlap

In this step, you should cut the strips of burlap that are 8-inches wide. It is great to use several colors of burlap. Now fold one of the strips in half and glue it down so that it covers the edge of the felt. Make ruffles by pinching the burlap and sticking it down. You should endure to kind pleats until you go all the way around the circle.

For adding a new piece, just crease the under the edge of the new strip ad overlay it a bit with the first. In the end, cut it slightly long and glue it to the back of the felt. After that, glue the middle of each pleat so that they lie smooth.

Now repeat the second layer, overlapping it with the first. You should also continue to add layers until you get close to the top.

On the last layer, consent some burlap hanging the felt at the top. If you need to style the final strip a little larger, you can pleat it so the front side is broader than the back. Make small creases all the way around. Another time, glue down the midpoint of each crease so they lie flat. Fold below the edges and glue, then trim off the additional burlap at the top so it’s even with the felt. Glue down the burlap perfectly so the raw edge won’t loosen.

Step 3: Add Ribbon

Finally, you will need to cut 6 pieces of ribbon about 2 feet long. You are able to use any ribbon. But with burlap ribbon, you can cut the edges easily. After that, glue the ends to the back at the top, bottom, and center of the opening. You can tie knots or bows for closing it and the tree skirt is complete.

By following the above-mentioned tips, you can make a beautiful tree skirt. You can find a wholesale wedding and craft product supplier for buying tulle fabric, grosgrain ribbon, burlap ribbon, satin tablecloth, chair cover, organza favor bag, and many others.